You are here: Home Shop Products Modems PTC-IIusb PACTOR 3 ready
Always current
Worldwide SCS Dealer Network

More than eighty percent of our products are sold and used outside Germany. A dense worldwide dealer network is available to our customers.

Worldwide PACTOR Service Providers

Click to the graphic to choose your PACTOR Service Provider.

 

(Product #1061) PTC-IIusb PACTOR 3 ready

Effective Datatransmission over Shortwaves. PACTOR-II & PACTOR-III, Compact unit, Low power consumption, GPS interface for NMEA data. The Multimode-Controller for PACTOR-III*, PACTOR-II, PACTOR-I, AMTOR, NAVTEX, RTTY, CW, FAX, SSTV, AUDIO-Filter, Packet-Radio and PSK31

PTC-IIusb PACTOR 3 ready
€ 898,00 *
net € 754,62

The PTC-IIusb allows direct connection to a USB interface of the modern notebook, and thus expands the SCS equipment program. The PTC-IIusb is constructed using existing equipment technology and its application is to be found mainly in the connection of clients. As a speciality, the PTC-IIusb is equipped with a transceiver control port, which allows remote control of the connected radio via software.    

The Hardware

  • Fully compatible to existing software by using a virtual COM port assigned by the USB driver.
  • One single connector to the HF/VHF transceiver    for all modes.
  • Transceiver control for ICOM, YAESU, SGC, KENWOOD and Rohde&Schwarz, including RS232 for modern transceivers.
  • Supported by Airmail/GetFax.
  • Special JVCOMM32-Mode for optimum cooperation with JVCOMM32.
  • Packet-Radio with 300, R600, 1200, 9600 and 19200 baud with built-in DSP.
  • With two high performance processors from Freescale, the PTC-IIusb achieves outstanding flexibility.
  • Sophisticated signal processing and analyzing maintains a stable HF link even during difficult  propagation conditions.
  • Temperature compensated crystal oscillator.
  • Tuning bar display with 15 dual color LED lamps.
  • 2 MB of static RAM.
  • Electronic (silicon) serial number.
  • Noise free HF reception by use of HF suitable construction, 6 layer multilayer board and filtering of all inputs and outputs.
  • Compact SMD assembly.
  • Flash-ROM for easy firmware updates.
  • Dimensions: 172 W x 43 H x 205 D mm, 1.69 H x 6.77 W x 8.07 D inches.
  •  Weight: 740 g
  • Power Supply:  +10 to +20 V DC, 300 mA max. Reverse polarity protected.
  • Fuse selfresetting.

PACTOR-II

  • Max. 1200 Bit/s, incl. data compression.
  • Automatic adaption to the channel quality in 4 speed levels.
  • Bandwidth 500 Hz.
  • Use of the most modern transfer mode technics: convolutional coding, Viterbi-decoder, soft-decision and Memory ARQ allows error free data transfers even with inaudible signals.
  • Automatic frequency correction of ± 80 Hz.
  • Automatic adaption of the radio’s transmit power to the channel quality is possible.

PACTOR-III*

Like PACTOR-II, but:

  • max. 5200 Bit/s, incl. data compression.
  • Automatic adaption to the channel quality in 6 speed levels.
  • Bandwidth 2400 Hz.

Robust HF-Packet

  • Newly developed very robust modulation for HF-Packet-Radio and APRS.
  • Max. 600 Bit/s.
  • Automatic frequency correction of ± 250 Hz. APRS
  • Fully automatic APRS-Beacon

 

Includes installation manual, CD-ROM, cables and power plug.

*PACTOR-III – pre Installed.

* incl. German VAT plus Shipping

Log in


Forgot your password? New user?
Cart
0 total € 0,00 *
net € 0,00
Check Out